The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.
Single cylinder wings, often referred to as donuts, are oval shaped air cells or bladders that are not permanently attached to a harness. While single cylinder wings have their origins in the realm of technical diving, they are becoming very popular in the recreational community. Not only are these single cylinder wings streamlined, but due to their shape being a continuous loop, they are very stable underwater. There is
no dramatic shift of air from left to right.
Apeks single cylinder wings are a smart design that allows a cylinder to nest deep inside them. These wings mate up nicely to the rest of the Apeks WTX collection of high quality harnesses, plates and accessories. They can be configured in multiple ways to match the type of diving that you do. As with the rest of the WTX collection, these single cylinder wings are built from the finest quality materials. They are designed by Apeks
and built in our own factory.
We know that each diver is different and that no two divers require exactly the same kit configuration. The WTX and WTX-D series allows you to put your equipment together your way, taking items from the range and mixing and matching them to create a rig that’s all yours. Here are just some of the options:
- Pick your harness
- Pick your backplate
- Select your wing
- Choose your accessories
- Decide on the mount
SINGLES WING FEATURES:
- Low profile K-style inflator
- Inflator safety cable to prevent hyper-extension
- Inflator is positioned off-centre so as not to interfere with 1st stage
- Flat, low profile dump valve
- Tank stabiliser bars
- 2 large drain grommets
- Centre mesh drain panel
WTX-D18 for a 10L cylinder. Gives 18Ibs lift
WTX-D30 for a 12L cylinder. Gives 32Ibs lift
WTX-D40 for a 20L cylinder. Gives a 40Ibs lift.
TWIN WING FEATURES:
- Designed to complement the twin-set manifolds and regulators
- Low profile 16" K-style inflator
- Inflator safety cable to prevent hyper-extension
- Inflator is positioned off-centre so as not to interfere with 1st stage
- Flat, low profile dump valve
- Dump valve positioned in front, lower-left side
- 2 large drain grommets
- Centre mesh drain panel
WTX-D40 for 24L (2x 12L).
WTX-D60 for 30L (2x 10L). Gives 60Ibs lift
IF WE ARE OUT OF STOCK ON YOUR PREFFERED CHOICE PLEASE CONTACT US AND WE CAN ORDER IT IN FOR YOU.
